H2 Risers

Product Description

This riser was design for the the first generation H2s. They are the only models I can very they fit with the caveats below. People are modifying units to fit their particular models. As people are ordering these apparently without researching the product OR  READING THIS.. this has lead to units being returned because "they do not fit", all sells are final. 

Please note. With the left-hand bar moved all the way to the fork stop, you will make contact with the windscreen. If this is unacceptable to you do not order the part. This particular situation should only acquire when you are positioning, the bike, and not something you will encounter while actually riding the motorcycle.

WARNING:  Do not use a ratchet strap to the handle bars to secure your motorcycle with these risers installed

Developed with the help of a long list of enthusiasts. I would like to give a special thanks to

Neal Ulen over at H2SXRiders.net – A Forum Dedicated to the Kawasaki Ninja H2 SX.

No lines or cables need to be replaced,  Hydraulic hose mount will need to be relocated,

The needed bracket is included .

Will raise the bars approximately 35MM ( 1.4inch)

Pull back 17MM ( .7 inch)

The risers and brackets are Mill Spec Anodized

Set includes:

Left and Right Bracket with anti-rotation pins in installed.

2-New Kawasaki PN 92154-3855 Bolts   

1-6x16MM Button Head Socket Cap Screw

Instructions online

Located here

Be sure to watch the YouTube Video ! Link

Export customers can get a quote for the shipping cost by emailing the shipping address to murph@murphskit.com, also state if the address is a home or business.