Black "Retro fit" Kit for the C10

The "retrofit" kit from Murphs' provides black fasteners for the stock windscreen (or Rifle lower unit) and all visible screws on the inner fairings. (The "black" inner fairings you see while sitting in the saddle.). It received its “retro”...

Fairing U-Nuts

These replace Kawasaki part number 92015-1602: Nut, cowl, 6MM. The parts manual shows 16 as being the number required.  

Windscreen-Fairing Nuts for 1994 and up

Replace OEM part number 92015-1757 NUT, 5MM, Concours 1994 and up.  Used on the Windshiled

Concours Fork Seals & Wipers

Made in Japan Choose your Year Model Range  

Valve Cover Gasket

Replaces Kawasaki PN 11009-1378 Add Ultra Black , Seal the lobe section on the gasket Included in Our Valve Adjustment Kit

Great Grips for Your Ride!

A Product We Have Sold Since Day OneSoft Rubber Textured SurfaceExcellent Damping Effect on Bike Buzz

Well Seals for C10

Replaces Kawasaki PN 11009-1377 Price Is For Four Pieces. Included in  Our Valve Adjustment Kit  

Original Stainless Screw Kit , Stainless or Black

The original kit offered from Murphs', the one that started the company, plus a little extra! Available in a blacken stainless as well.This kit utilizes button-head cap screws made from A2 stainless steel. With an Allen head drive, stripped screws are a...

Bergmen Engineering Fuel Tank Quick Release

This makes  removing the fuel tank a tooless afair. The factory bolts were prone to breaking here. Install this kit and now all you have to do is pull the cotter pins. remove the washers and the tank Will slip over the bolt heads.

Brake Line Crush Washers

A package of 10 crush washers for the brake as well as the clutch lines. When you order new lines, new washers come in the package. These are good to have around if you need replacements while doing periodic maintenance, such as cleaning or rebuilding...

Master Cylinder Rebuild Kit

 Brake Master Cylinder kit includes piston, seal, cup seal, spring, dust cover boot and cir-clip. Made in Japan

"Coolant Logs" or Cooling System Manifold Seal Kit

This kit contains the o-rings to seal part number 32033-1262 and part number 32033-1719 to the head. It also contains the o-ring to seal the rear pipe to the thermostat housing.  Replaces Kawasakis Part Numbers: 7 - part number 92055-1282 1 - part...